HP Printer Not Printing both Sides :- Solution
When it comes to duplex printing, it basically means that you print on both sides of the paper in question. Now, this could be done both manually or even automatically simply by turning over the paper. Your model should have the built-in functionality in order to duplex print. Simplex printing is another technique whereby prints can be garnered on a single side of the paper.
For printing on both sides, you can use the print driver settings as well. The steps involved to How to Fix My HP Printer Not Printing both sides as follows:
- To keep page ordering issues at bay, the paper tray should be loaded with sufficient blank paper so that the print job can be completed without any disruption.
- Open the document, click on File option followed by the Print option.
- Select your printer, and then choose Printer Properties, Preferences, or Printer Setup (whichever option is displayed), for opening up the Printing Preferences or the Document Properties options.
- Decide whether you want to read the pages as a booklet or a tablet.
- You can select the below mentioned processes for choosing and opening the settings for duplex printing-
- Choose the Features, Layout or Finishing tabs and then choose the option for page flip. This comes under the Print under both sides manually
- Suppose there is a tab for the Printing shortcut. You should choose the same and then choose the shortcut for two-sided printing. You can then opt for the page flip option which is basically printing manually on both sides.
If you can find a Basic tab, select a page flip option under Double-Sided Printing (Manual). - Click OK, and then Print. At this stage, it should be noted that if the printer automatically pulls the pages back in and prints the other side, there will be support for duplexing automatically and the printing procedure will be finished. Also, if the printer does not automatically do so, you should continue the steps below to reload the pages to print the other side.
- Next, the printed pages should be removed from the output tray, and then reloaded into the paper tray.
- If you have a front-loading printer, in all likelihood, the stack printed side facing up will have to be loaded in case of Inkjets and Laser Jets will require printing in a downward facing position where it has the top/bottom edge on it, depending upon your requirements.
- In case it is a rear-loading printer, then the pages should be flipped over in order to ensure that the printed side is downward-facing. The bottom short edge has to be then loaded into the printer.
Click Continue to print the other side of the pages.
Now that you’re familiar with How to Fix My HP Printer Not Printing Double Sided, you should know that in terms of affordability, duplex printing is hugely effective. The Arizona State University, for instance, has already studied the overall impact of duplex printing on our environment.
We all know how important printer drivers are for a printer to print something. You can’t start your printer before installing them and if the HP printer driver is unavailable then it is surely going to be a problem for you.
There are two popular ways that you can try when your HP printer driver is unavailable. You can both uninstall the printer driver and then install it again. You should also check for the latest Windows Updates and install the latest version.
Method 1- Uninstall and Reinstall the Printer Driver Automatically
The HP printer driver is unavailable error takes place due to a mismatched printer driver. All you need to do is uninstall your existing printer driver, and then install the latest driver to get rid of the ‘HP Printer driver is unavailable’ error on the HP printer. You can follow these steps to do it:
- Visit the Control Panel and select Devices and Printers
- Right-click on your printer and click on ‘Remove device’
- Press Windows key + R which will open the Run box
- Type devmgmt.msc and click on OK.
- Find and right-click on the printer and choose ‘Uninstall device’
- Pick ‘Uninstall’ if you are asked for a confirmation
- Wait for at least 10-15 minutes and plug the wires back and let the system identify and install the compulsory drivers
You can now print a test page and see if the error has been fixed or not. If your system is unable to detect the printer drivers on its own then you will be required to do it manually.
Method 2- Uninstall and Reinstall the Printer Driver Manually
If you are unable to get the HP printer driver automatically then there is nothing to worry about as you can install them manually by following these steps:
- Open the Run box by pressing Windows key + R together
- Type devmgmt.msc and click on OK
- Click on Print queues which will open the drop down menu
- Right click on your printer and click to update the driver
- Now, choose to Browse my computer for driver software and go on
- You will be taken to the Microsoft website and download the package “wushowhide.diagcab” from there
- Run the package and click on Next once it is done
- Select the Hide updates option in the next step
Select the printer update and continue if you come across it
